Loading Classes / Programs / Events

← Back to Classes / Programs / Events

Vint Hill Site

+ Google Map
4151 Weeks Drive
Warrenton, VA 20187 United States
540-868-7021

December 2020

Microsoft Azure Basics

December 16 @ 5:00 pm - 9:00 pm
Vint Hill Site, 4151 Weeks Drive
Warrenton, VA 20187 United States
+ Google Map

Are you interested in knowing more about cloud offerings such as Microsoft Azure and how it might help you or your organization? Are you familiar with other cloud service providers, but want to get a quick comparison of Azure services? In this short, 3 to 4-hour course you will be introduced to the key products and services Azure has to offer. This class will start with a quick discussion on the pros/cons of cloud solutions and how Azure fits into…

Find out more »

February 2021

Plumbing Level 1 Apprenticeship

February 8, 2021 @ 6:00 pm - 10:00 pm
Vint Hill Site, 4151 Weeks Drive
Warrenton, VA 20187 United States
+ Google Map

This class serves as the first level of training in the Plumbing craft. Structured as a hybrid class, a combination of online training and live classroom/lab training, students learn the following content: Core Curriculum; Basic Safety; Intro to Construction Math; Intro to Hand Tools; Intro to Power Tools; Intro to Construction Drawings; Basic Communication Skills; Employability Skills; Introduction to the Plumbing Profession, Plumbing Safety, Plumbing Tool, Introduction to Plumbing Math, Introduction to Plumbing Drawings, Plastic Pipe and Fittings, Copper Pipe…

Find out more »

Plumbing Level 2 Apprenticeship

February 9, 2021 @ 6:00 pm - 10:00 pm
Vint Hill Site, 4151 Weeks Drive
Warrenton, VA 20187 United States
+ Google Map

This class serves as the second year of training in the Plumbing craft. Structured as a hybrid class, a combination of online training and live classroom/lab training, students learn the following content: Plumbing Math Two; Reading Commercial Drawings; Hangers, Supports, Structural Penetrations, and Fire Stopping; Installing and Testing DWV Piping; Installing Roof, Floor, and Area Drains; Types of Valves; Installing and Testing Water Supply Piping; Installing Fixtures, Valves, and Faucets; Introduction to Electricity; Installing Water Heaters; Fuel Gas Systems; Servicing…

Find out more »

Heavy Equipment Operator Level 1

February 22, 2021 @ 6:00 pm - 10:00 pm
Vint Hill Site, 4151 Weeks Drive
Warrenton, VA 20187 United States
+ Google Map

Become a heavy equipment operator and earn an industry-recognized credential. The Heavy Equipment Operator program was developed to meet the growing employment demands for equipment operators. This class serves as the first level of training in the Heavy Equipment Operator program. Students will learn the following content: core craft skills, orientation to the trade, heavy equipment safety, identification of heavy equipment, basic operational techniques, utility tractors, introduction to earthmoving, interpreting civil drawings, and using simulator exercises for equipment basic controls,…

Find out more »

March 2021

HVAC Level 1 Apprenticeship

March 8, 2021 @ 6:00 pm - 10:00 pm
Vint Hill Site, 4151 Weeks Drive
Warrenton, VA 20187 United States
+ Google Map

This class serves as the first level of training in the HVAC craft. Structured as a hybrid class, a combination of on-line training and live classroom/lab training, students learn the following content: Core Curriculum; Basic Safety; Intro to Construction Math; Intro to Hand Tools; Intro to Power Tools; Intro to Construction Drawings; Basic Comm. Skills; Employability Skills; Introduction to the HVAC Profession; HVAC Trade Math; Copper and Plastic Piping Practices; Soldering and Brazing; Ferrous Metal Piping Practices; Basic Electricity; Introduction…

Find out more »

Electrical Level 1 Apprenticeship

March 8, 2021 @ 6:00 pm - 10:00 pm
Vint Hill Site, 4151 Weeks Drive
Warrenton, VA 20187 United States
+ Google Map

This class serves as the first level of training in the Electrical craft. Structured as a hybrid class, a combination of on-line training and live classroom/lab training, students learn the following content: Core Curriculum; Basic Safety; Intro to Construction Math; Intro to Hand Tools; Intro to Power Tools; Intro to Construction Drawings; Basic Comm. Skills; Employability Skills; Orientation to the Electrical Trade; Electrical Safety; Introduction to Electrical Circuits; Electrical Theory;  Introduction to the National Electrical Code; Device Boxes; Hand Bending;…

Find out more »

Electrical Level 2 Apprenticeship

March 9, 2021 @ 6:00 pm - 10:00 pm
Vint Hill Site, 4151 Weeks Drive
Warrenton, VA 20187 United States
+ Google Map

This class serves as the second level of training in the Electrical craft. Structured as a hybrid class, a combination of on-line training and live classroom/lab training, students learn the following content: Alternating Current, Motors: Theory & Application, Electric Lighting, Conduit Bending, Pull and Junction Boxes, Conductor Installations, Cable Tray, Conductor Terminations & Splices, Grounding and Bonding,  Circuit Breakers & Fuses, Control Systems and Fundamental Concepts. Computer and internet access required for hybrid class.

Find out more »

HVAC Level 2 Apprenticeship

March 9, 2021 @ 6:00 pm - 10:00 pm
Vint Hill Site, 4151 Weeks Drive
Warrenton, VA 20187 United States
+ Google Map

This class serves as the second level of training in the HVAC craft. Structured as a hybrid class, a combination of on-line training and live classroom/lab training, students learn the following content: Commercial Airside Systems; Chimneys, Vents, and Flues; Introduction to Hydronic Systems; Air Quality Equipment; Leak Detection, Evacuation, Recovery, and Charging; Alternating Current; Basic Electronics; Introduction to Circuit Troubleshooting; Troubleshooting Gas Heating; Troubleshooting Cooling; Heat Pumps; Basic Installation and Maintenance Practices; Sheet Metal Duct Systems. Textbook, Online Access Code,…

Find out more »

Electrical Level 3 Apprenticeship

March 10, 2021 @ 6:00 pm - 10:00 pm
Vint Hill Site, 4151 Weeks Drive
Warrenton, VA 20187 United States
+ Google Map

 This class serves as the third level of training in the Electrical craft. Structured as a hybrid class, a combination of on-line training and live classroom/lab training, students learn the following content: This course will cover the following: Load Calculations-Branch and Feeder Circuits, Conductor Selection & Calculations, Practical Applications and Lighting, Hazardous Locations, Over current Protection, Distribution Equipment, Transformers, Commercial Electrical Services, Motor Calculations, Voice/Data/Video, Motor Controls. Computer and internet access required for hybrid class. 

Find out more »

HVAC Level 3 Apprenticeship

March 10, 2021 @ 6:00 pm - 10:00 pm
Vint Hill Site, 4151 Weeks Drive
Warrenton, VA 20187 United States
+ Google Map

This class serves as the third year of training in the HVAC craft. Structured as a hybrid class, a combination of on-line training and live classroom/lab training, students learn the following content: Refrigerants and Oils; Compressors; Metering Devices; Retail Refrigeration Systems; Commercial Hydronic Systems; Steam Systems; Planned Maintenance; Water Treatment; Troubleshooting Electronic Controls; Troubleshooting Oil Heating; Troubleshooting Oil Heating; Troubleshooting Heat Pumps; Troubleshooting Accessories. Textbook, Online Access Code, and all materials are included. Computer and internet access required for hybrid…

Find out more »

Electrical Level 4 Apprenticeship

March 11, 2021 @ 6:00 pm - 10:00 pm
Vint Hill Site, 4151 Weeks Drive
Warrenton, VA 20187 United States
+ Google Map

This class serves as the fourth level of training in the Electrical craft. Structured as a hybrid class, a combination of on-line training and live classroom/lab training, students learn the following content: Load Calculations-Feeders & Services, Health Care Facilities, Standby and Emergency Systems, Basic Electronic Theory, Fire Alarm Systems, Specialty Transformers, Heat Tracing and Freeze Protection, Motor Operation and Maintenance, Medium Voltage Termination/Splices, Special Locations, and Fundamentals of Crew Leadership. Computer and internet access required for hybrid class. 

Find out more »

HVAC Level 4 Apprenticeship

March 11, 2021 @ 6:00 pm - 10:00 pm
Vint Hill Site, 4151 Weeks Drive
Warrenton, VA 20187 United States
+ Google Map

This class serves as the fourth and final level of training in the HVAC craft. Structured as a hybrid class, a combination of on-line training and live classroom/lab training, students learn the following content: Construction Drawings and Specifications, System Balancing, Indoor Air Quality, Energy Conservation Equipment, Building Management Systems, Systems Startup and Shutdown, Heating and Cooling System Design, Commercial and Industrial Refrigeration Systems, Alternative Heating and Cooling Systems, Introduction to Supervisory Skills. Computer and internet access required for hybrid class. 

Find out more »

Heavy Equipment Operator Level 1

March 13, 2021 @ 8:00 am - 4:00 pm
Vint Hill Site, 4151 Weeks Drive
Warrenton, VA 20187 United States
+ Google Map

Become a heavy equipment operator and earn an industry-recognized credential. The Heavy Equipment Operator program was developed to meet the growing employment demands for equipment operators. This class serves as the first level of training in the Heavy Equipment Operator program. Students will learn the following content: core craft skills, orientation to the trade, heavy equipment safety, identification of heavy equipment, basic operational techniques, utility tractors, introduction to earthmoving, interpreting civil drawings, and using simulator exercises for equipment basic controls,…

Find out more »

April 2021

Microsoft PowerPoint Essentials (Level 1)

April 13, 2021 @ 9:00 am - 3:00 pm
Vint Hill Site, 4151 Weeks Drive
Warrenton, VA 20187 United States
+ Google Map

Are your PowerPoint presentations STALE or out-of-date? Modernize them using the tips and tricks taught in this class. We will energize your toolkit to create presentations for today’s audiences. In this beginner’s course you will learn both the basics and advanced skills such as designing eye-catching slides and adding multimedia pizzazz. Delivering your presentation will be a snap using the built-in presenting techniques and the importance of presentation props. In this course, you will learn: (1) Designing eye-catching slides, (2)…

Find out more »

May 2021

CFC Prep and Exam

May 15, 2021 @ 8:30 am - 2:00 pm
Vint Hill Site, 4151 Weeks Drive
Warrenton, VA 20187 United States
+ Google Map

Everyone who wants to work with refrigeration systems must be certified under the EPA guidelines. Learn the essentials of CFCs and then complete the EPA Section 608 exam online during class. You will know your test results immediately. Class will end at noon on the final day of class. Special Notice: If interested in retesting, please call 540-868-7021 to be registered in the second Saturday of any of the upcoming CFC classes to do the retest only. The fee for…

Find out more »

July 2021

HVAC Journeyman / Master Exam Prep

July 10, 2021 @ 8:00 am - 3:00 pm
Vint Hill Site, 4151 Weeks Drive
Warrenton, VA 20187 United States
+ Google Map

This course will assist those preparing for licensure by providing a review of material that one might expect to see on the exam. Individuals desiring to work as tradesmen in heating, ventilation and air conditioning (HVAC), must obtain a license in accordance with the Virginia Department of Professional and Occupational Regulations. The exam includes installation, alteration and repair of HVAC systems and incidental equipment. Upon registration, students will receive a confirmation email with a list of technical references that are…

Find out more »

August 2021

Plumbing Level 1 Apprenticeship

August 2, 2021 @ 6:00 pm - 10:00 pm
Vint Hill Site, 4151 Weeks Drive
Warrenton, VA 20187 United States
+ Google Map

This class serves as the first level of training in the Plumbing craft. Structured as a hybrid class, a combination of online training and live classroom/lab training, students learn the following content: Core Curriculum; Basic Safety; Intro to Construction Math; Intro to Hand Tools; Intro to Power Tools; Intro to Construction Drawings; Basic Communication Skills; Employability Skills; Introduction to the Plumbing Profession, Plumbing Safety, Plumbing Tool, Introduction to Plumbing Math, Introduction to Plumbing Drawings, Plastic Pipe and Fittings, Copper Pipe…

Find out more »

Plumbing Level 2 Apprenticeship

August 3, 2021 @ 6:00 pm - 10:00 pm
Vint Hill Site, 4151 Weeks Drive
Warrenton, VA 20187 United States
+ Google Map

This class serves as the second year of training in the Plumbing craft. Structured as a hybrid class, a combination of online training and live classroom/lab training, students learn the following content: Plumbing Math Two; Reading Commercial Drawings; Hangers, Supports, Structural Penetrations, and Fire Stopping; Installing and Testing DWV Piping; Installing Roof, Floor, and Area Drains; Types of Valves; Installing and Testing Water Supply Piping; Installing Fixtures, Valves, and Faucets; Introduction to Electricity; Installing Water Heaters; Fuel Gas Systems; Servicing…

Find out more »

Plumbing Level 3 Apprenticeship

August 4, 2021 @ 6:00 pm - 10:00 pm
Vint Hill Site, 4151 Weeks Drive
Warrenton, VA 20187 United States
+ Google Map

This class serves as the third year of training in the Plumbing craft. Structured as a hybrid class, a combination of online training and live classroom/lab training, students learn the following content: applied math, sizing water supply piping, potable water treatment, backflow preventors, types of venting, sizing DWV and storm systems, sewage pumps and sump pumps, corrosive-resistant waste piping, compressed air. Textbook, online access code, and all materials are included. 

Find out more »

Heavy Equipment Operator Level 1

August 7, 2021 @ 8:00 am - 4:00 pm
Vint Hill Site, 4151 Weeks Drive
Warrenton, VA 20187 United States
+ Google Map

Become a heavy equipment operator and earn an industry-recognized credential. The Heavy Equipment Operator program was developed to meet the growing employment demands for equipment operators. This class serves as the first level of training in the Heavy Equipment Operator program. Students will learn the following content: core craft skills, orientation to the trade, heavy equipment safety, identification of heavy equipment, basic operational techniques, utility tractors, introduction to earthmoving, interpreting civil drawings, and using simulator exercises for equipment basic controls,…

Find out more »
+ Export Events